| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -20.0 TO 20.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 6.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.3210 INCHES NOMINAL |
| MAXIMUM TEMP RISE | 3.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.8110 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 12.500 INPUT TO OUTPUT NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 28.50 NOMINAL |
| ROTOR INPUT CURRENT RATING | 90.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 500.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.5200 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 1.13 NOMINAL |
| STATOR INPUT CURRENT RATING | 590.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 680.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 3.2 NOMINAL |
| ZRO IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 292.00 NOMINAL |
| ZRS IMPEDANCE ANGLE IN DEG | 47.00 NOMINAL |
| ZRS IMPEDANCE MAGNITUDE IN OHMS | 3.15 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 47.00 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 3.15 NOMINAL |
| ZSS IMPEDANCE ANGLE IN DEG | 79.00 NOMINAL |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 292.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 6 WIRE LEAD |
| TRANSFORMATION RATIO | 6.875 ROTOR TO STATOR NOMINAL |
| UNDERCUT DIAMETER | 0.9620 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |