| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 232.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 700.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| BODY SIZE | 15 |
| ZRO RESISTANCE IN OHMS | 13.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 111.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 3.90 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 19.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 19.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 10.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 6.50 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 3.00 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 3.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| BODY STYLE | STANDARD ROUND B |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND |
| 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 2.8150 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND |
| 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0880 INCHES MINIMUM AND |
| 0.0980 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0680 INCHES MINIMUM AND |
| 0.0880 INCHES MAXIMUM |
| PILOT LENGTH | 0.0350 INCHES MINIMUM AND |
| 0.0450 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1270 INCHES MINIMUM AND |
| 0.1370 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2800 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0950 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8780 INCHES NOMINAL |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.9400 INCHES MINIMUM AND |
| 0.9800 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0220 INCHES MINIMUM AND |
| 0.0320 INCHES MAXIMUM SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 99932 |
| DESIGN CONTROL REFERENCE | BGC-15-AYS-1 |