| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 16.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.9930 INCHES MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 75.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3680 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0480 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 3657.00 NOMINAL AND 4043.00 MAXIMUM |
| PLUS J ZRS REACTANCE IN OHMS | 356.00 MINIMUM AND 484.00 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 30.60 NOMINAL AND 41.40 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 630.00 MINIMUM AND 770.00 MAXIMUM |
| ROTOR INPUT CURRENT RATING | 29.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 850.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6100 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0030 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0200 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR DC RESISTANCE IN OHMS | 8.36 MINIMUM AND 11.44 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 807.00 MINIMUM AND 1093.00 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 1317.50 MINIMUM AND 1782.50 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 9.50 MINIMUM AND 11.50 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 TURRET |
| TORQUE GRADIENT PER ANGULAR DEG | 2400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| UNDERCUT DIAMETER | 0.6890 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |