| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.13 INCH-OUNCES MAXIMUM |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 1.2 MINIMUM AND 1.3 MAXIMUM |
| OVERALL LENGTH | 0.9030 INCHES MINIMUM AND 2.4000 INCHES MAXIMUM |
| MAXIMUM TEMP RISE | 20.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 10.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6500 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 2.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 964.00 MINIMUM AND 1304.00 MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 1054.00 MINIMUM AND 1426.00 MAXIMUM |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM FRONT SHAFT |
| SHAFT DIAMETER | 0.1200 INCHES MAXIMUM REAR SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| STATOR INPUT CURRENT RATING | 3.0 MILLIAMPERES NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 2.8 MINIMUM AND 3.4 MAXIMUM |
| ZRO RESISTANCE IN OHMS | 330.00 MINIMUM AND 446.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 399.00 MINIMUM AND 541.00 MAXIMUM |
| TERMINAL LOCATION | SIDE |
| TERMINAL TYPE AND QUANTITY | 8 WIRE LEAD |
| TRANSFORMATION RATIO | 16.335 ROTOR TO STATOR MINIMUM AND 16.665 ROTOR TO STATOR MAXIMUM |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |