| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.5 TO 3.5 |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL, STAINLESS |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.985 ROTOR TO COMPENSATOR NOMINAL |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.4790 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.0640 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 6.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 880.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 80.00 NOMINAL |
| SHAFT DIAMETER | 0.1871 INCHES MINIMUM AND 0.1873 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT LENGTH | 0.4150 INCHES NOMINAL SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 40.00 NOMINAL |
| ZRO RESISTANCE IN OHMS | 320.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 60.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 120.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 12 WIRE LEAD |
| TRANSFORMATION RATIO | 6.000 ROTOR TO STATOR NOMINAL |
| UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |