| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.00 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 4.00 CENTIMETER-GRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8750 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.0950 INCHES NOMINAL |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 MINIMUM AND 408.0 MAXIMUM |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6320 INCHES NOMINAL |
| SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 5.600 INPUT TO OUTPUT MINIMUM AND 8.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 79.20 MINIMUM AND 96.80 MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 468.00 MINIMUM AND 572.00 MAXIMUM |
| ROTOR DC RESISTANCE IN OHMS | 38.80 MINIMUM AND 50.40 MAXIMUM |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0680 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM |
| ZRO RESISTANCE IN OHMS | 64.60 MINIMUM AND 87.40 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 12.05 MINIMUM AND 14.95 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 8.64 MINIMUM AND 11.88 MAXIMUM |
| STATOR INPUT CURRENT RATING | 115.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 170.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 10.6 MINIMUM AND 12.0 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |