| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 0.80 INCH-OUNCES MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.40 INCH-OUNCES MAXIMUM |
| AFT OF FIRST FLANGE DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| BODY DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| BODY MATERIAL | ALUMINUM |
| BODY SIZE | 23 |
| BODY STYLE | STANDARD ROUND D |
| FLANGE DIAMETER | 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| OUTPUT VOLTAGE FUNCTIONAL ERROR RANGE IN PERCENT | -0.2 TO 0.2 |
| OVERALL LENGTH | 4.4930 INCHES MINIMUM AND 4.5440 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 0.53 INPUT |
| MAXIMUM TEMP RISE | 65.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 1.06 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 3.4300 INCHES MINIMUM AND 3.4450 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.2520 INCHES NOMINAL |
| PILOT DIAMETER | 0.5900 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 28.800 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0460 INCHES NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 250.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 170.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 8.0 WATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 20.0 MINIMUM AND 90.0 MAXIMUM |
| SECOND SHOULDER DIAMETER | 1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM |
| SECOND SHOULDER LENGTH | 0.1700 INCHES NOMINAL |
| SHAFT DIAMETER | 0.2402 INCHES MINIMUM AND 0.2405 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT NOMINAL THREAD SIZE | 0.250 INCHES SINGLE SHAFT |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3100 INCHES NOMINAL SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| SHAFT TYPE | ROUND, THREADED SINGLE SHAFT |
| SHOULDER DIAMETER | 1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 280.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 7 SCREW |
| TEST DATA DOCUMENT | 81349-MIL-R-14346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TRANSFORMATION RATIO EQUALITY IN PERCENT | 0.5 NOMINAL |
| TRANSFORMATION RATIO | 1.000 STATOR TO ROTOR NOMINAL |