| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY SIZE | 10 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.3580 INCHES NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 12.00 OUTPUT |
| MAXIMUM TEMP RISE | 20.0 CELSIUS |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 19.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7320 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 2.500 INPUT TO OUTPUT MINIMUM AND 5.500 INPUT TO OUTPUT MAXIMUM |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ROTOR INPUT CURRENT RATING | 130.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.6140 INCHES MINIMUM AND 0.6380 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9950 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 6.00 MINIMUM AND 12.00 MAXIMUM |
| ZRO IMPEDANCE ANGLE IN DEG | 80.50 MINIMUM AND 84.00 MAXIMUM |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 200.00 MINIMUM AND 300.00 MAXIMUM |
| ZSS IMPEDANCE ANGLE IN DEG | 18.00 MINIMUM AND 30.00 MAXIMUM |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 0.445 ROTOR TO STATOR MINIMUM AND 0.463 ROTOR TO STATOR MAXIMUM |