| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -22.5 TO 22.5 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 1.0 CENTIMETER-GRAMS MAXIMUM |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3300.0 MILLIMETER-MILLIGRAMS MAXIMUM |
| BODY DIAMETER | 0.9660 INCHES MAXIMUM |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 10 |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 2.0810 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 70.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6960 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.300 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 45.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 243.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 27.50 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 120.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS MAXIMUM |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0495 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.3130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 12.3 SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.0400 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED SINGLE SHAFT |
| ZRO RESISTANCE IN OHMS | 44.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 56.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 13.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 10.00 NOMINAL |
| TERMINAL LOCATION | FRONT AND REAR |
| TERMINAL TYPE AND QUANTITY | 9 WIRE LEAD |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |