| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -30.0 TO 30.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5400.0 MILLIMETER-MILLIGRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 2700.0 MILLIMETER-MILLIGRAMS NOMINAL |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7470 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.7680 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.3680 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 38.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 270.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 31.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 36.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 1.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 540.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4000 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND SINGLE SHAFT |
| UNDERCUT DIAMETER | 0.6890 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 39.00 MINIMUM AND 53.00 MAXIMUM |
| ZRS RESISTANCE IN OHMS | 72.00 MINIMUM AND 98.00 MAXIMUM |
| ZSO RESISTANCE IN OHMS | 9.00 MINIMUM AND 13.00 MAXIMUM |
| STATOR DC RESISTANCE IN OHMS | 13.00 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 2200.0 MILLIMETER-MILLIGRAMS NOMINAL |