| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 5000.00 MILLIMETER-MILLIGRAMS MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND 0.8150 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0900 INCHES MINIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 11 |
| BODY STYLE | STANDARD ROUND C |
| FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.9380 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.6820 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PLUS J ZSO REACTANCE IN OHMS | 40.50 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 43.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 28.00 NOMINAL |
| RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0 TO 45.0 |
| ROTOR DC RESISTANCE IN OHMS | 18.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 95.0 MILLIAMPERES MINIMUM AND 100.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.2500 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPER ANGLE IN DEG | 2.0 SINGLE SHAFT |
| SHAFT TAPER LENGTH | 0.0750 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TAPERED END MINOR DIAMETER | 0.1150 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, TAPERED SINGLE SHAFT |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.9750 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 44.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 57.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 11.70 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 9.30 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| TORQUE GRADIENT PER ANGULAR DEG | 2000.000 MILLIMETER-MILLIGRAMS NOMINAL |