| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| BODY SIZE | 15 |
| BODY STYLE | STANDARD ROUND B |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| OVERALL LENGTH | 3.0210 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 60.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 90.00 |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.3910 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 20.000 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| SHAFT DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.4230 INCHES NOMINAL SINGLE SHAFT |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0015 INCHES MAXIMUM |
| SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| SHAFT MAXIMUM RUNOUT | 0.0008 INCHES |
| SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| SHAFT THREAD LENGTH | 0.3550 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT THREAD SERIES DESIGNATOR | UNEF SINGLE SHAFT |
| SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0730 INCHES MINIMUM AND 0.0830 INCHES MAXIMUM |
| SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| STATOR INPUT CURRENT RATING | 25.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 700.0 MILLIWATTS NOMINAL |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TRANSFORMATION RATIO | 0.720 ROTOR TO STATOR MINIMUM AND 0.749 ROTOR TO STATOR MAXIMUM |