| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| BODY SIZE | 8 |
| BODY STYLE | STANDARD ROUND A |
| FLANGE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| OVERALL LENGTH | 1.4310 INCHES MINIMUM AND 1.4710 INCHES MAXIMUM |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 OUTPUT |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2900 INCHES MAXIMUM |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| PILOT LENGTH | 0.0430 INCHES NOMINAL |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| PLUS J ZRO REACTANCE IN OHMS | 1260.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 140.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 37.00 NOMINAL |
| ROTOR INPUT CURRENT RATING | 100.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 540.0 MILLIWATTS NOMINAL |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| SHAFT FLATTED PORTION LENGTH | 0.0850 INCHES MINIMUM AND 0.0950 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT FLATTED PORTION THICKNESS | 0.0130 INCHES MINIMUM AND 0.0170 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT DIAMETER | 0.0895 INCHES MINIMUM AND 0.0900 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.1410 INCHES MINIMUM AND 0.1710 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT TYPE | ROUND, FLATTED SINGLE SHAFT |
| UNDERCUT DIAMETER | 0.6880 INCHES MINIMUM AND 0.6910 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 12.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 10.40 NOMINAL |
| TERMINAL LOCATION | REAR |
| TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |