5995-01-212-6301 CABLE ASSEMBLY,SPECIAL PURPOSE,E Index 5340-01-212-6303 CLIP,RETAINING

National Stock Number:
5985-01-212-6302

Federal Supply Class:
5985

National Item Identification Number:
012126302

Description:
ATTENUATOR,VARIABLE

Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).


Manufacturer Information:
10272609-112598RLC ELECTRONICS, INC
10272609-118876U S ARMY AVIATION AND MISSILE COMMAND
10272609-119605INSCOM ELECTRONICS CORPORATION
STA-1100-00-001-0534078CINCH CONNECTIVITY SOLUTIONS INC


Techincal Specification:
ADJUSTMENT DEVICE TYPE AND QUANTITY1 SHAFT AND 1 SLOTTED SCREW
APPLICATION DESIGNTRANSMISSION LINE
ATTENUATION PER STEP IN DECIBELS1.0
ATTENUATION VARIATION METHODSTEPPED
BODY STYLERECTANGULAR, TERMINALS ON ONE SURFACE
BUSHING LENGTH0.139 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.557 INCHES MINIMUM AND 1.567 INCHES MAXIMUM
FREQUENCY RANGE50.000 MEGAHERTZ MINIMUM AND 70.000 MEGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS50.0 INPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS0.2
OVERALL ATTENUATION ACCURACY IN DECIBELS-0.100 TO 0.100
OVERALL ATTENUATION RANGE IN DECIBELS+0.0 TO 10.0
OVERALL HEIGHT1.100 INCHES MAXIMUM
OVERALL LENGTH2.400 INCHES MAXIMUM
OVERALL WIDTH1.643 INCHES MAXIMUM
MOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE
MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER0.112 INCHES
MOUNTING FACILITY PATTERNTWO POSITION DIAGONAL
MOUNTING FACILITY SCREW THREAD SERIES DESIGNATORUNC
MOUNTING THREAD QUANTITY40 PER INCH
SHAFT LENGTH0.062 INCHES NOMINAL
SHAFT DIAMETER0.255 INCHES MAXIMUM
SHAFT TYPEROUND, SLOTTED
STEP POSITION QUANTITY2
TERMINAL TYPE AND QUANTITY6 PIN


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us