5985-01-158-0056, ATTENUATOR,VARIABLE

National Stock Number:
5985-01-158-0056

Federal Supply Class:
5985

National Item Identification Number:
011580056

Description:
ATTENUATOR,VARIABLE

Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Manufacturer Information:

M24215/9-001	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-A-24215/9	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-24215/9	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ADJUSTMENT DEVICE TYPE AND QUANTITY	1 KNOB W/DIAL
APPLICATION DESIGN	TRANSMISSION LINE
ATTENUATION VARIATION METHOD	CONTINUOUS
BODY STYLE	COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.844 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	0.656 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION	SMA
FREQUENCY RANGE	2.000 GIGAHERTZ MINIMUM AND 8.000 GIGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS	50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS	0.5
OVERALL ATTENUATION RANGE IN DECIBELS	+0.0 TO 20.0
OVERALL HEIGHT	2.500 INCHES NOMINAL
OVERALL LENGTH	2.510 INCHES NOMINAL
OVERALL WIDTH	1.000 INCHES NOMINAL
MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR
POWER RATING	2.0 WATTS AVERAGE
SPECIFICATION/STANDARD DATA	81349-MIL-A-24215/9 GOVERNMENT SPECIFICATION
VOLTAGE STANDING WAVE RATIO	1.50
TERMINAL TYPE AND QUANTITY	2 CONNECTOR, COAXIAL, FEMALE
TEST DATA DOCUMENT	81349-MIL-A-24215 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
UNTHREADED MOUNTING HOLE DIAMETER	0.104 INCHES NOMINAL

Click here to Register for Free 30-day Trial