|
|
|
National Stock Number:
5985-00-679-9486
Federal Supply Class:
5985
National Item Identification Number:
006799486
Description:
ATTENUATOR,VARIABLE
Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
|
Manufacturer Information:
| 383-0056-00 | 13499 | ROCKWELL COLLINS, INC. | | 383-0056-00 | 95105 | ROCKWELL COLLINS, INC. | | 383-0056-000 | 95105 | ROCKWELL COLLINS, INC. | | JJJ68227 | 01121 | ROCKWELL AUTOMATION, INC. |
|
Techincal Specification:
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT | | APPLICATION DESIGN | AUDIO | | ATTENUATION VARIATION METHOD | CONTINUOUS | | BODY DIAMETER | 1.156 INCHES MAXIMUM | | BODY LENGTH | 1.906 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL W/SIDE TERMINALS | | BUSHING LENGTH | 0.375 INCHES NOMINAL | | FREQUENCY RANGE | 0.000 KILOHERTZ MINIMUM AND 1.000 KILOHERTZ MAXIMUM | | IMPEDANCE RATING IN OHMS | 600.0 INPUT-OUTPUT | | OVERALL ATTENUATION ACCURACY IN DECIBELS | -7.00 TO 7.00 | | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 56.0 | | OVERALL LENGTH | 2.723 INCHES NOMINAL | | OVERALL WIDTH | 1.516 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.375 INCHES | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNEF | | MOUNTING THREAD QUANTITY | 32 PER INCH | | OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS | | POWER RATING | 2.0 WATTS AVERAGE | | SCHEMATIC DIAGRAM DESIGNATOR | BALANCED "H" | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.812 INCHES NOMINAL | | SHAFT TYPE | ROUND, SLOTTED | | TERMINAL TYPE AND QUANTITY | 9 TAB, SOLDER LUG |
|
|