|
|
|
National Stock Number:
5977-00-839-1913
Federal Supply Class:
5977
National Item Identification Number:
008391913
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 9020937 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | A8153 | 17472 | EATON AEROSPACE LLC | | A8153 | 72121 | EATON MOTOR SITE |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 1.375 INCHES NOMINAL SINGLE SHUNT | | CONTACT FACE STYLE | CONCAVE | | LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | STACKPOLE/CARBONE CARBON GRADE 40 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | ELECTROGRAPHITIC | | RADIUS | 0.987 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED | | SHUNT POSITION DESIGNATOR | 2 | | WIDTH | 0.839 INCHES MINIMUM AND 0.843 INCHES MAXIMUM | | STYLE DESIGNATOR | ONE PIECE | | TERMINAL HOLE DIAMETER | 0.144 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 1 TUBULAR W/HOLE | | THICKNESS | 0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | TOP STYLE | FLAT WITH RIGHT EDGE BEVELED |
|
|