|
|
|
National Stock Number:
5977-00-165-0865
Federal Supply Class:
5977
National Item Identification Number:
001650865
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 19502-4 | 29201 | JOHN DEER CONSUMER PRODUCTS INC | | A11435 | 46522 | DCM MANUFACTURING, INC. | | A5772 | 46522 | DCM MANUFACTURING, INC. | | K8590L | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| ANGLE | 13.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 2.250 INCHES NOMINAL SINGLE SHUNT | | CONTACT FACE STYLE | CONCAVE | | LENGTH | 1.000 INCHES NOMINAL | | OUTER EDGE TO SLOT EDGE DISTANCE | 0.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | CARBONE CORP GRADE 3101 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON | | RADIUS | 1.219 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 INSULATED | | SHUNT POSITION DESIGNATOR | 2 | | SLOT WIDTH | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | TOP LEFT AND RIGHT EDGE BEVELED 45.0 DEG | | WIDTH | 0.735 INCHES MINIMUM AND 0.748 INCHES MAXIMUM | | STYLE DESIGNATOR | ONE PIECE | | TERMINAL SLOT WIDTH | 0.171 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/SLOT | | THICKNESS | 0.371 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | TOP STYLE | FLAT WITH BEVELED SLOT |
|
|