|
|
|
National Stock Number:
5970-01-515-0300
Federal Supply Class:
5970
National Item Identification Number:
015150300
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| SIL-PAD-K10AC | 55285 | HENKEL CORPORATION |
|
Techincal Specification:
| MATERIAL AND LOCATION | OVERALL SILICONE AND OVERALL FILM | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SIL PAD K10 | | SPECIAL FEATURES | BEIGE;0.005 TO 0.007 MILLIMETERS THICK;MINUS 60 TO PLUS 180 DEGREES CENTIGRADE CONTINUOUS USE TEMPERATURE;KAPTON REINFORCEMENT CARRIER;90 SHORE A HARDNESS;6000 DIELECTRIC BREAKDOWN VOLTAGE,VAC;3.7 DIELECTRIC CONSTANT,1000HZ;VTM-O FLAME RATING |
|
|