|
|
|
National Stock Number:
5970-01-209-0632
Federal Supply Class:
5970
National Item Identification Number:
012090632
Description:
INSULATOR,DISK
Detail:
AN INSULATOR THAT IS ESSENTIALLY THIN, FLAT, AND ROUND IN SHAPE, WITH OR WITHOUT HOLES. THE GENERAL SHAPE MAY VARY BY THE ADDITION OF SUCH FEATURES AS BEVELED EDGES, INDENTED SURFACES, THROUGH-HOLE KEY AND/OR PERIPHERAL FLATS. IT MAY HAVE ONE OR MORE HOLES OFF CENTER; IF THERE ARE TWO OR MORE HOLES, ONE MAY BE CENTRALLY LOCATED. EXCLUDES MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 0N327034-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| FIRST HOLE SPACING | 0.050 NOMINAL INCHES | | FIRST HOLE DIAMETER | 0.034 INCHES MINIMUM AND 0.041 INCHES MAXIMUM | | MATERIAL AND LOCATION | BASE PLASTIC, MIL-P-18177 AND BASE PLASTIC, LAMINATED THERMOSETTING | | IDENTIFICATION CODE COLOR | CLEAR | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.255 INCHES MINIMUM AND 0.261 INCHES MAXIMUM | | OVERALL HEIGHT | 0.015 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.034 INCHES MINIMUM AND 0.041 INCHES MAXIMUM | | SECOND HOLE SPACING | 0.100 INCHES NOMINAL | | STYLE DESIGNATOR | DRILLED, FLAT | | SURFACE TREATMENT AND LOCATION | OVERALL ANY ACCEPTABLE | | TEST DATA DOCUMENT | 98230-0N327034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|