|
|
|
National Stock Number:
5970-01-198-9362
Federal Supply Class:
5970
National Item Identification Number:
011989362
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 7608804 | 93322 | GE AVIATION SYSTEMS LLC DBA GE AVIATION |
|
Techincal Specification:
| INSIDE DIAMETER | 0.089 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.250 INCHES NOMINAL | | OVERALL HEIGHT | 0.046 INCHES NOMINAL | | MATERIAL AND LOCATION | OVERALL PLASTIC, EPOXY, MIL-P-18177, TYPE GEB OR OVERALL PLASTIC, NEMA G-10 OR OVERALL PLASTIC,NEMA GRADE G11 | | SPECIAL FEATURES | SLOT ON OUTER EDGE 0.046 IN. W WITH 0.023 IN. RADIUS; 0.026 IN. MIN AND 0.036 IN. MAX THICKNESS ON SLOTTED EDGE,0.065 IN. FROM CENTER HOLE | | STYLE DESIGNATOR | ROUND, FLAT |
|
|