|
|
|
National Stock Number:
5970-01-075-5371
Federal Supply Class:
5970
National Item Identification Number:
010755371
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 3148723 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 346702-000 | 02769 | LOCKHEED MARTIN CORPORATION | | 346702-000 | 56232 | LOCKHEED MARTIN CORPORATION | | 5310PL0907727 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
|
Techincal Specification:
| INSIDE DIAMETER | 0.192 INCHES MINIMUM AND 0.202 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM | | OVERALL HEIGHT | 0.006 INCHES MINIMUM AND 0.010 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL MICA, ASTM D351, CLASS V-4 | | SPECIAL FEATURES | MICRO INCH FINISH 125 | | STYLE DESIGNATOR | ROUND, FLAT |
|
|