| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 1.720 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.570 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 0.900 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| FLEXIBILITY | SEMIRIGID |
| HEIGHT | 1.380 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.880 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.420 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.330 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY SMALL END INSIDE DIAMETER | 1.420 INCHES MINIMUM AS SUPPLIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-301, RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE |
| MATERIAL | PLASTIC POLYOLEFIN |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.070 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| SPECIAL FEATURES | LARGE END HAS LIP |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | -55.0 CELSIUS |