| ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | 30.0 NOMINAL AS SUPPLIED |
| ANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH | 1.160 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| FIRST BRANCH INSIDE DIAMETER | 0.270 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| FIRST BRANCH INSIDE DIAMETER | 0.520 INCHES MINIMUM AS SUPPLIED |
| FIRST BRANCH WALL THICKNESS | 0.060 INCHES MAXIMUM AS SUPPLIED |
| FIRST BRANCH WALL THICKNESS | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| FLEXIBILITY | FLEXIBLE |
| MAIN BODY WALL THICKNESS | 0.060 INCHES MAXIMUM AS SUPPLIED |
| MAIN BODY WALL THICKNESS | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY INSIDE DIAMETER | 0.270 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY INSIDE DIAMETER | 0.520 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY OVERALL LENGTH | 2.310 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-81765/1,TYPE I MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | PLASTIC CROSS-LINKED POLYOLEFIN |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | ADHESIVE/SEALANT APPLIED TO EACH END |
| STYLE DESIGNATOR | TRANSITION-T |
| TEMP RATING | -55.0 CELSIUS AND 135.0 CELSIUS |