| BODY HEIGHT | 0.172 INCHES NOMINAL |
| BODY LENGTH | 0.653 INCHES NOMINAL |
| BODY WIDTH | 0.653 INCHES NOMINAL |
| CASE OUTLINE SOURCE AND DESIGNATOR | MS-018-AC JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| CRITICALITY CODE JUSTIFICATION | CBBL |
| FEATURES PROVIDED | ELECTROSTATIC SENSITIVE AND SELECTED ITEM |
| INCLOSURE CONFIGURATION | LEADED CHIP CARRIER |
| INCLOSURE MATERIAL | PLASTIC |
| INPUT CIRCUIT PATTERN | 9 INPUT AND 13 INPUT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT, PLASTIC ENCAPSULATED (SURFACE MOUNT) - PROCUREMENT AND SELECTION REQUIREMENTS (FOR SERIAL FIFO) |
| PROPRIETARY CHARACTERISTICS | PACS |
| MEMORY CAPACITY | 2048WORDSX9BITS |
| MEMORY DEVICE TYPE | FIRST-IN FIRST-OUT |
| OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS |
| SPECIAL FEATURES | ITEM IS SELECTED FROM CAGE61772 P/N IDT72103L35J OR IDT72103L35JI BASED ON REQUIREMENTS CONTAINED ON SELECTED ITEM DRAWING 356A1409 |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.0 VOLTS NOMINAL POWER SOURCE AND 2.0 VOLTS MINIMUM INPUT LOGIC 1 AND 0.8 VOLTS MAXIMUM INPUT LOGIC 0 |
| TERMINAL TYPE AND QUANTITY | 44 J-HOOK |
| TEST DATA DOCUMENT | 89954-356A1409 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |