| BODY HEIGHT | 0.008 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| BODY LENGTH | 0.450 INCHES MAXIMUM |
| BODY WIDTH | 0.200 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CASE OUTLINE SOURCE AND DESIGNATOR | -0-004-AH JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| DESIGN FUNCTION AND QUANTITY | 2 FLIP-FLOP, J-K, CLOCKED AND 2 FLIP-FLOP, J-K, MASTER SLAVE |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND HIGH SPEED AND W/CLEAR AND EDGE TRIGGERED AND ASYNCHRONOUS AND SYNCHRONOUS AND DARLINGTON-CONNECTED AND W/STORAGE |
| INCLOSURE CONFIGURATION | FLAT PACK |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| INPUT CIRCUIT PATTERN | 10 INPUT |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| MAXIMUM POWER DISSIPATION RATING | 240.0 MILLIWATTS |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |
| PRECIOUS MATERIAL | GOLD |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 5.5 VOLTS MAXIMUM POWER SOURCE |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| TERMINAL TYPE AND QUANTITY | 16 FLAT LEADS |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 35351-154868 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TIME RATING PER CHACTERISTIC | 40.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 55.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |