|
|
|
National Stock Number:
5962-01-039-3837
Federal Supply Class:
5962
National Item Identification Number:
010393837
Description:
MICROCIRCUIT,DIGITAL
Detail:
A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or 1 and 0.
|
Manufacturer Information:
| 7600901E | 01295 | TEXAS INSTRUMENTS INCORPORATED | | 7600901E | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 7600901E | 18324 | PHILIPS SEMICONDUCTORS INC | | 7600901E | 27014 | NATIONAL SEMICONDUCTOR CORPORATION | | A76009 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | DM54LS191J/883B | 27014 | NATIONAL SEMICONDUCTOR CORPORATION | | DM54LS191J/883B | C7191 | ADELCO ELEKTRONIK GMBH | | DM54LS191J/883B | D6528 | LACON ELECTRONIC GMBH | | DM54LS191J/883BA | C7191 | ADELCO ELEKTRONIK GMBH | | S54LS191F/883B | 18324 | PHILIPS SEMICONDUCTORS INC | | SN74LS191N-00 | 01295 | TEXAS INSTRUMENTS INCORPORATED | | SNC54LS191J-00 | 01295 | TEXAS INSTRUMENTS INCORPORATED |
|
Techincal Specification:
| BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | BODY LENGTH | 0.896 INCHES MAXIMUM | | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 | | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND SCHOTTKY AND LOW POWER AND W/ENABLE | | INCLOSURE CONFIGURATION | DUAL-IN-LINE | | INCLOSURE MATERIAL | CERAMIC AND GLASS | | INPUT CIRCUIT PATTERN | 8 INPUT | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC | | MAXIMUM POWER DISSIPATION RATING | 176.0 MILLIWATTS | | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS | | TEST DATA DOCUMENT | 14933-A76009 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|