|
|
|
National Stock Number:
5961-01-026-5372
Federal Supply Class:
5961
National Item Identification Number:
010265372
Description:
SEMICONDUCTOR DEVICE,DIODE
Detail:
A TWO ELECTRODE SEMICONDUCTOR DEVICE HAVING AN ASYMMETRICAL VOLTAGE - CURRENT CHARACTERISTIC. MAY OR MAY NOT INCLUDE MOUNTING HARDWARE AND/OR HEATSINK. EXCLUDES LIGHT EMITTING DIODE AND SEMICONDUCTOR DEVICE,PHOTO. FOR ITEMS CONTAINING MATERIAL SUCH AS SELENIUM AND COPPER OXIDE, SEE RECIFIER, METALLIC.
|
Manufacturer Information:
| 152-0400-00 | 59873 | SPACELABS-HILLSBORO OPERATIONS SQUIBB VITATEK INC | | 152-0400-00 | 80009 | TEKTRONIX, INC. | | 1N4936 | 04713 | FREESCALE SEMICONDUCTOR, INC. | | 89300430 | F3880 | THALES AIR DEFENCE | | 89300430 | F8224 | THALES LAS FRANCE SAS | | JAN1N4936 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MB2501 | 14552 | MICROSEMI CORPORATION | | SK1977K | 04713 | FREESCALE SEMICONDUCTOR, INC. | | SR1977K | 04713 | FREESCALE SEMICONDUCTOR, INC. |
|
Techincal Specification:
| CURRENT RATING PER CHARACTERISTIC | 1.00 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | OVERALL DIAMETER | 0.100 INCHES MINIMUM AND 0.107 INCHES MAXIMUM | | OVERALL LENGTH | 0.185 INCHES MINIMUM AND 0.205 INCHES MAXIMUM | | MATERIAL | GLASS INCLOSURE | | MATERIAL | SILICON SEMICONDUCTOR | | MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 150.0 CELSIUS AMBIENT AIR | | MOUNTING METHOD | TERMINAL | | VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 450.0 MAXIMUM NONREPETITIVE PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE AND 400.0 MAXIMUM WORKING PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE | | TERMINAL LENGTH | 1.100 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 80009-152-0400-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|