5905-01-056-6221 RESISTOR,FIXED,WIRE WOUND Index 5905-01-056-6223 RESISTOR,FIXED,WIRE WOUND,INDUCT

National Stock Number:
5955-01-056-6222

Federal Supply Class:
5955

National Item Identification Number:
010566222

Description:
CRYSTAL UNIT,QUARTZ

Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.


Manufacturer Information:
CR27/U3M78333381349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CR27AU3-783333MH81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-C-3098/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-3098/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DRIVE LEVEL RATING4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM
BODY LENGTH0.775 INCHES MAXIMUM
BODY THICKNESS0.317 INCHES MAXIMUM
BODY WIDTH0.725 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
CIRCUIT RESONANCEANTIRESONANCE
CONTROLLED REFERENCE TEMP75.0 CELSIUS
EQUIVALENT RESISTANCE VALUE IN OHMS75.0 MAXIMUM
FREQUENCY STABILITY IN PERCENT-0.0005 TO 0.0005
FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT-0.002 TO 0.002
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.002 TO 0.002
LOAD CAPACITANCE IN PICOFARADS31.5 MINIMUM AND 32.5 MAXIMUM
OPERABLE TEMP RANGE-55.0 TO 90.0 CELSIUS
OPERATING TEMP RANGE+70.0 TO 80.0 CELSIUS
OVERALL LENGTH1.023 INCHES MAXIMUM
OVERALL THICKNESS0.352 INCHES MAXIMUM
OVERALL WIDTH0.757 INCHES MAXIMUM
MODE OF OSCILLATIONFUNDAMENTAL
SHUNT CAPACITANCE IN PICOFARADS7.0 MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-C-3098/9 GOVERNMENT SPECIFICATION
SPECIFIED FREQUENCY3.783333 MEGAHERTZ
STYLE DESIGNATOROVAL BODY, PIN TERMINALS
TERMINAL LENGTH0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
TERMINAL DIAMETER0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
TEST DATA DOCUMENT81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial