5955-01-015-4514 CRYSTAL UNIT,QUARTZ Index 6150-01-015-4516 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
5955-01-015-4515

Federal Supply Class:
5955

National Item Identification Number:
010154515

Description:
CRYSTAL UNIT,QUARTZ

Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.


Manufacturer Information:
CR-27A/U7.861111MHZ81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CR27/U7M86111181349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
CR27AU71034BLILEY TECHNOLOGIES INC
MIL-PRF-3098/981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILC3098-981349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DRIVE LEVEL RATING4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM
BODY LENGTH0.775 INCHES MAXIMUM
BODY THICKNESS0.317 INCHES MAXIMUM
BODY WIDTH0.725 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM
CIRCUIT RESONANCEANTIRESONANCE
CONTROLLED REFERENCE TEMP75.0 CELSIUS
EQUIVALENT RESISTANCE VALUE IN OHMS24.0 MAXIMUM
FREQUENCY STABILITY IN PERCENT-0.0005 TO 0.0005
FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT-0.002 TO 0.002
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.002 TO 0.002
LOAD CAPACITANCE IN PICOFARADS31.5 MINIMUM AND 32.5 MAXIMUM
OPERABLE TEMP RANGE-55.0 TO 90.0 CELSIUS
OPERATING TEMP RANGE+70.0 TO 80.0 CELSIUS
OVERALL LENGTH1.023 INCHES MAXIMUM
OVERALL THICKNESS0.352 INCHES MAXIMUM
OVERALL WIDTH0.757 INCHES MAXIMUM
MODE OF OSCILLATIONFUNDAMENTAL
SHUNT CAPACITANCE IN PICOFARADS7.0 MAXIMUM
SPECIFICATION/STANDARD DATA81349-MILC3098/9 GOVERNMENT SPECIFICATION
SPECIFIED FREQUENCY7.861111 MEGAHERTZ
STYLE DESIGNATOROVAL BODY, PIN TERMINALS
TERMINAL DIAMETER0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
TERMINAL LENGTH0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
TEST DATA DOCUMENT81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial