|
|
|
National Stock Number:
5955-00-715-2343
Federal Supply Class:
5955
National Item Identification Number:
007152343
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 145739-000 | 81413 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | CR-38A/U81.950KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR38A/U81K95000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | JKEH17T81-950KHZ | 75378 | CTS INC | | JKEH17T81-95OKHZ | 75378 | CTS INC | | MIL-C-3098/18 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 1.0 MILLIWATTS NOMINAL AND 0.8 MILLIWATTS MINIMUM AND 1.2 MILLIWATTS MAXIMUM | | BODY LENGTH | 1.520 INCHES MAXIMUM | | BODY WIDTH | 0.720 INCHES MAXIMUM | | BODY THICKNESS | 0.317 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.474 INCHES MINIMUM AND 0.490 INCHES MAXIMUM | | CIRCUIT RESONANCE | SERIES RESONANCE | | EQUIVALENT RESISTANCE VALUE IN OHMS | 60.0 NOMINAL | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.010 TO 0.010 AND -0.100 TO 0.100 | | OVERALL LENGTH | 1.745 INCHES MAXIMUM | | OVERALL THICKNESS | 0.345 INCHES MAXIMUM | | OVERALL WIDTH | 0.750 INCHES MAXIMUM | | MATERIAL | GLASS COVER, HOLDER | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERATING TEMP RANGE | -0.1 TO 70.0 CELSIUS | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098/18 GOVERNMENT SPECIFICATION | | SPECIFIED FREQUENCY | 81.950 KILOHERTZ | | STYLE DESIGNATOR | TUBE BODY, WIRE LEADS | | TERMINAL LENGTH | 0.225 INCHES MAXIMUM | | TERMINAL DIAMETER | 0.030 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MIL-C-3098/38 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|