|
|
|
National Stock Number:
5955-00-667-2665
Federal Supply Class:
5955
National Item Identification Number:
006672665
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 290-0017-00 | 13499 | ROCKWELL COLLINS, INC. | | CR-36/U12.500000MHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/16 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 2.5 MILLIWATTS NOMINAL AND 2.0 MILLIWATTS MINIMUM AND 3.0 MILLIWATTS MAXIMUM | | BODY LENGTH | 0.775 INCHES MAXIMUM | | BODY WIDTH | 0.725 INCHES MAXIMUM | | BODY THICKNESS | 0.317 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL | | CIRCUIT RESONANCE | ANTIRESONANCE | | CONTROLLED REFERENCE TEMP | 85.0 CELSIUS | | EQUIVALENT RESISTANCE VALUE IN OHMS | 22.0 NOMINAL | | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 | | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 | | LOAD CAPACITANCE IN PICOFARADS | 32.0 NOMINAL AND 31.5 MINIMUM AND 32.5 MAXIMUM | | OPERATING TEMP RANGE | +80.0 TO 90.0 CELSIUS | | OVERALL LENGTH | 1.023 INCHES MAXIMUM | | OVERALL THICKNESS | 0.352 INCHES MAXIMUM | | OVERALL WIDTH | 0.757 INCHES MAXIMUM | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERABLE TEMP RANGE | -55.0 TO 80.0 CELSIUS | | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM | | SPECIFIED FREQUENCY | 12.500 MEGAHERTZ | | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS | | TERMINAL LENGTH | 0.238 INCHES NOMINAL | | TERMINAL DIAMETER | 0.050 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|