|
|
National Stock Number: 5955-00-147-1525
Federal Supply Class: 5955
National Item Identification Number: 001471525
Description: CRYSTAL UNIT,QUARTZ
Detail: An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
CR55/U36M50000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | CR55AU36500000MHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-PRF-3098/33 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MILC3098 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
DRIVE LEVEL RATING | 2.0 MILLIWATTS NOMINAL AND 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM | BODY THICKNESS | 0.150 INCHES MAXIMUM | BODY WIDTH | 0.402 INCHES MAXIMUM | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.192 INCHES NOMINAL | CIRCUIT RESONANCE | SERIES RESONANCE | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 NOMINAL | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 | OPERATING TEMP RANGE | -55.0 TO 105.0 CELSIUS | OVERALL LENGTH | 0.530 INCHES MAXIMUM | OVERALL THICKNESS | 0.183 INCHES MAXIMUM | OVERALL WIDTH | 0.435 INCHES MAXIMUM | MODE OF OSCILLATION | THIRD OVERTONE | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM | SPECIFIED FREQUENCY | 36.500 MEGAHERTZ | STYLE DESIGNATOR | OVAL BODY, WIRE LEADS | TERMINAL LENGTH | 1.500 INCHES MINIMUM | TERMINAL DIAMETER | 0.017 INCHES NOMINAL | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|