|
|
National Stock Number: 5955-00-140-5749
Federal Supply Class: 5955
National Item Identification Number: 001405749
Description: CRYSTAL UNIT,QUARTZ
Detail: An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
CA3-76-25-000000MHZ | 00809 | WENZEL INTERNATIONAL INC | CR65AU25-000000MHZ | 75378 | CTS INC | CR76/U25M00000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | CR76AU25-000000MHZ | 00136 | MICROSEMI CORP. - HIGH PERFORMANCE TIMING | CR76AU25-000000MHZ | 18853 | INFICON EDC INC. | CR76AU25-000000MHZ | 23875 | M-TRON INDUSTRIES, INC. | CR76AU25-000000MHZ | 59492 | QUARTZTEK INC | CR76AU25.000000MHZ | 13571 | ELECTRONIC RESEARCH CO SUB OF Q-TECH CORP | MIL-C-3098/53 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | MIL-PRF-3098/53 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
DRIVE LEVEL RATING | 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM | BODY THICKNESS | 0.150 INCHES MAXIMUM | BODY WIDTH | 0.402 INCHES MAXIMUM | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | CIRCUIT RESONANCE | SERIES RESONANCE | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 MAXIMUM | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 AND -0.003 TO 0.003 | OPERATING TEMP RANGE | -40.0 TO 90.0 CELSIUS AND -55.0 TO 105.0 CELSIUS | OVERALL LENGTH | 0.530 INCHES MAXIMUM | OVERALL THICKNESS | 0.183 INCHES MAXIMUM | OVERALL WIDTH | 0.435 INCHES MAXIMUM | MATERIAL | GLASS COVER, HOLDER | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE | SHUNT CAPACITANCE IN PICOFARADS | 3.5 MAXIMUM | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098/53 GOVERNMENT SPECIFICATION | SPECIFIED FREQUENCY | 25.000 MEGAHERTZ | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS | TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM | TERMINAL LENGTH | 0.5003 INCHES MINIMUM | TEST DATA DOCUMENT | 81349-MIL-C-3098/62 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|