|
|
|
National Stock Number:
5950-01-348-3022
Federal Supply Class:
5950
National Item Identification Number:
013483022
Description:
COIL,RADIO FREQUENCY
Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.
|
Manufacturer Information:
| 240-0121-110 | 00213 | STRUTHERS-DUNN INC. | | 240-0121-110 | 13499 | ROCKWELL COLLINS, INC. | | IM-2-301 2UH 10% | 91637 | VISHAY DALE ELECTRONICS, LLC | | IM-2-301.2UH PORM 10% | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| BODY LENGTH | 0.250 INCHES NOMINAL | | COIL FORM TYPE | SOLID SINGLE COMPONENT | | CORE CONSTRUCTION | S0LID SINGLE COMPONENT | | DC RESISTANCE RATING IN OHMS | 0.180 SINGLE COMPONENT SINGLE WINDING | | INCLOSURE TYPE | FULLY INCLOSED | | INDUCTANCE RATING | 1.20 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING | | OVERALL DIAMETER | 0.095 INCHES NOMINAL | | MOUNTING METHOD | TERMINAL SINGLE GROUP | | QUALITY FACTOR | 25 MINIMUM SINGLE COMPONENT SINGLE WINDING | | RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | WINDING OPERATING CURRENT | 590.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING | | TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD | | TEST DATA DOCUMENT | 13499-240-0121 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|