| BODY HEIGHT | 3.062 INCHES MAXIMUM |
| BODY LENGTH | 2.375 INCHES MAXIMUM |
| BODY WIDTH | 1.500 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.234 INCHES MINIMUM AND 1.266 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.140 INCHES MINIMUM AND 1.172 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| IMPEDANCE RATING IN OHMS | 2.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| INCLOSURE TYPE | FULLY INCLOSED |
| MAXIMUM OPERATING TEMP | 170.0 CELSIUS |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.201 INCHES MAXIMUM SINGLE GROUP |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| PRIMARY TO SECONDARY TURN RATIO | 1 TO 7 SINGLE COMPONENT |
| PULSE REPETITION RATE | 3.0 KILOHERTZ SINGLE COMPONENT |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 10001-2534905 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |