| BODY HEIGHT | 2.375 INCHES NOMINAL |
| BODY LENGTH | 1.625 INCHES NOMINAL |
| BODY WIDTH | 1.625 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.188 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.188 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 100.0 HERTZ MINIMUM AND 7.5 KILOHERTZ MAXIMUM SINGLE COMPONENT |
| IMPEDANCE RATING IN OHMS | 600.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| IMPEDANCE RATING IN OHMS | 600.0 NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| MAXIMUM TRANSFORMER POWER RATING | 23.0 DECIBELS SINGLE COMPONENT |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED STUD SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.138 INCHES SINGLE GROUP |
| NONDEFINITIVE SPEC/STD DATA | TF1A16AJ TYPE |
| PRIMARY TO SECONDARY TURN RATIO | 1 TO 1 SINGLE COMPONENT |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| WINDING SHIELDING METHOD | INTERNAL SHIELD GROUNDED TO CORE AND BROUGHT OUT TO TERMINAL SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 5 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-T-27 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |
| THREAD QUANTITY PER INCH | 32 SINGLE GROUP |
| TRANSFORMER FUNCTION | LINE |