|
|
|
National Stock Number:
5945-01-026-6103
Federal Supply Class:
5945
National Item Identification Number:
010266103
Description:
CHOPPER,ELECTRONIC
Detail:
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see VIBRATOR, INTERRUPTER and VIBRATOR, SELF-RECTIFYING.
|
Manufacturer Information:
| 010-611-0006-00 | 81541 | SENSATA TECHNOLOGIES MARYLAND, INC | | 36A | 82227 | VDO CONTROL SYSTEMS INC |
|
Techincal Specification:
| DWELL TIME RATING IN DEG | 155.0 MINIMUM AND 185.0 MAXIMUM | | DRIVE VOLTAGE RELATIONSHIP TO INPUT VOLTAGE | NOT RATED | | CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW | | CONTACT CURRENT RATING | 2.0 MILLIAMPERES MAXIMUM | | CONTACT VOLTAGE RATING | 10.0 DC VOLTS NOMINAL | | HERMETICALLY SEALED FEATURE | NOT PROVIDED | | INPUT VOLTAGE RATING | 6.3 AC VOLTS NOMINAL | | OUTPUT/INPUT VOLTAGE RELATIONSHIP | NOT RATED | | OVERALL DIAMETER | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 1.516 INCHES NOMINAL | | MOUNTING CONFIGURATION | TERMINAL MTD | | MOUNTING FACILITY QUANTITY | 4 | | MOUNTING FACILITY SIZE | 0.750 IN. DIA BY 1.516 IN. LG | | MOUNTING METHOD | TERMINAL | | MOUNTING PROVISION | TERMINALS | | OPERATING TEMP RANGE | -65.0 TO 100.0 CELSIUS | | PHASE ANGLE IN DEG | 25.0 | | PLUG IN MOUNTING FEATURE | NOT PROVIDED | | TERMINAL QUANTITY | 7 | | TERMINAL TYPE | PIN AND SOLDER LUG/STUD | | UNIT TYPE | ELECTROMECHANICAL |
|
|