|
|
|
National Stock Number:
5945-00-996-2247
Federal Supply Class:
5945
National Item Identification Number:
009962247
Description:
CHOPPER,ELECTRONIC
Detail:
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see VIBRATOR, INTERRUPTER and VIBRATOR, SELF-RECTIFYING.
|
Manufacturer Information:
| 583C60-1 | 94033 | CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV | | 800-7 | 81541 | SENSATA TECHNOLOGIES MARYLAND, INC | | DMS 81015B | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| DRIVE FREQUENCY RATING | 60.0 HERTZ NOMINAL | | DRIVE VOLTAGE RELATIONSHIP TO INPUT VOLTAGE | EQUAL | | DWELL TIME RATING IN DEG | 147.0 MINIMUM AND 187.0 MAXIMUM | | CONTACT ARRANGEMENT | DOUBLE POLE, DOUBLE THROW | | CONTACT CURRENT RATING | 2.0 MILLIAMPERES NOMINAL | | CONTACT OPERATION SEQUENCE | BREAKS BEFORE MAKES | | CONTACT VOLTAGE RATING | 100.0 DC VOLTS MAXIMUM | | CUBIC MEASURE | 2.576 CUBIC INCHES | | INPUT VOLTAGE RATING | 6.3 AC VOLTS NOMINAL | | OPERATING TEMP RANGE | -65.0 TO 100.0 CELSIUS | | OUTPUT/INPUT VOLTAGE RELATIONSHIP | EQUAL | | OVERALL HEIGHT | 0.750 INCHES MINIMUM AND 0.812 INCHES MAXIMUM | | OVERALL LENGTH | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM | | OVERALL WIDTH | 1.500 INCHES MINIMUM AND 1.562 INCHES MAXIMUM | | MOUNTING CONFIGURATION | FOUR 1/8 IN. DIA MTG HOLES ON 9/16 IN. BY 1-11/16 IN. MTG CENTERS | | MOUNTING FACILITY QUANTITY | 4 | | MOUNTING FACILITY SIZE | 0.125 IN. DIA | | MOUNTING METHOD | FLANGE | | MOUNTING PROVISION | HOLES | | PHASE ANGLE IN DEG | 20.0 | | PLUG IN MOUNTING FEATURE | NOT PROVIDED | | UNIT TYPE | ELECTROMECHANICAL | | TERMINAL QUANTITY | 9 | | TERMINAL TYPE | SOLDER LUG/STUD |
|
|