|
|
|
National Stock Number:
5945-00-992-2298
Federal Supply Class:
5945
National Item Identification Number:
009922298
Description:
CHOPPER,ELECTRONIC
Detail:
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see VIBRATOR, INTERRUPTER and VIBRATOR, SELF-RECTIFYING.
|
Manufacturer Information:
| 354-1033-00 | 13499 | ROCKWELL COLLINS, INC. | | 354-1033-000 | 95105 | ROCKWELL COLLINS, INC. | | 95908-39 | 08664 | BRISTOL BABCOCK INC INSTRUMENTS-SYSTEMS DIV SUB OF BABCOCK INTL INC |
|
Techincal Specification:
| DWELL TIME RATING IN DEG | 145.0 MINIMUM AND 180.0 MAXIMUM | | DRIVE VOLTAGE RELATIONSHIP TO INPUT VOLTAGE | EQUAL | | BASE TYPE | STANDARD BASE | | BASE MOUNTING SIZE DESIGNATION | SMALL 7 PIN TUBE BASE SIZE | | COIL TYPE | NOT ISOLATED | | CONTACT CURRENT RATING | 2.0 MILLIAMPERES NOMINAL | | CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, OPEN NEUTRAL | | CONTACT OPERATION SEQUENCE | MAKES BEFORE BREAKS | | CONTACT VOLTAGE RATING | 10.0 DC VOLTS MAXIMUM | | CUBIC MEASURE | 2.036 CUBIC INCHES | | HERMETICALLY SEALED FEATURE | PROVIDED | | INPUT VOLTAGE RATING | 6.3 AC VOLTS NOMINAL | | OPERATING TEMP RANGE | -65.0 TO 100.0 CELSIUS | | OUTPUT/INPUT VOLTAGE RELATIONSHIP | EQUAL | | OVERALL HEIGHT | 2.302 INCHES MINIMUM AND 2.322 INCHES MAXIMUM | | OVERALL LENGTH | 1.006 INCHES MINIMUM AND 1.026 INCHES MAXIMUM | | OVERALL WIDTH | 0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM | | PHASE ANGLE IN DEG | 55.0 | | PLUG IN MOUNTING FEATURE | PROVIDED | | TERMINAL PATTERN ARRANGEMENT | 0.375 IN. DIA PIN CIRCLE | | TERMINAL QUANTITY | 7 | | TERMINAL TYPE | PIN | | UNIT TYPE | ELECTROMECHANICAL |
|
|