|
|
|
National Stock Number:
5945-00-991-7129
Federal Supply Class:
5945
National Item Identification Number:
009917129
Description:
CHOPPER,ELECTRONIC
Detail:
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see VIBRATOR, INTERRUPTER and VIBRATOR, SELF-RECTIFYING.
|
Manufacturer Information:
| 044-0010-354 | 76854 | ELECTRO SWITCH CORP. | | 354-1031-00 | 13499 | ROCKWELL COLLINS, INC. | | 354-1031-000 | 95105 | ROCKWELL COLLINS, INC. | | 372-8 | 81541 | SENSATA TECHNOLOGIES MARYLAND, INC | | DMS 81015B | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| DRIVE FREQUENCY RATING | 380.0 HERTZ MINIMUM AND 420.0 HERTZ MAXIMUM | | DWELL TIME RATING IN DEG | 115.0 MINIMUM AND 165.0 MAXIMUM | | DRIVE VOLTAGE RELATIONSHIP TO INPUT VOLTAGE | EQUAL | | COIL TYPE | NOT ISOLATED | | CONTACT CURRENT RATING | 2.0 MILLIAMPERES MAXIMUM | | CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW | | CONTACT OPERATION SEQUENCE | MAKES BEFORE BREAKS | | CONTACT VOLTAGE RATING | 10.0 DC VOLTS NOMINAL | | HERMETICALLY SEALED FEATURE | NOT PROVIDED | | INPUT VOLTAGE RATING | 6.3 AC VOLTS NOMINAL | | OPERATING TEMP RANGE | -55.0 TO 100.0 CELSIUS | | OUTPUT/INPUT VOLTAGE RELATIONSHIP | EQUAL | | OVERALL HEIGHT | 1.703 INCHES MAXIMUM | | OVERALL LENGTH | 1.438 INCHES MAXIMUM | | OVERALL WIDTH | 0.800 INCHES MAXIMUM | | MOUNTING CONFIGURATION | FOUR 0.125 IN. DIA MTG HOLES ON 1.125 IN. BY 0.719 IN. MTG CENTERS | | MOUNTING FACILITY QUANTITY | 4 | | MOUNTING FACILITY SIZE | 0.125 IN. DIA | | MOUNTING METHOD | FLANGE | | MOUNTING PROVISION | HOLES | | PHASE ANGLE IN DEG | 65.0 | | PLUG IN MOUNTING FEATURE | NOT PROVIDED | | TERMINAL QUANTITY | 7 | | TERMINAL TYPE | SOLDER LUG/STUD | | UNIT TYPE | ELECTROMECHANICAL |
|
|