|
|
|
National Stock Number:
5945-00-688-2808
Federal Supply Class:
5945
National Item Identification Number:
006882808
Description:
CHOPPER,ELECTRONIC
Detail:
An electromechanical or electronic (includes solid state semiconductor items) device designed to convert an electrical signal into a modified square wave output signal. For items excited by an alternating current, the output signal is the same frequency as, and bears a definite phase relationship to, the excitation voltage. For those electronic items designed to operate on direct current only, the output frequency of the item is dependent upon the inherent properties of the item, or the internal or external circuit constants, or the applied driving coil voltage impressed on the input signal. For an electromechanical item whose coil is designed for direct current only, see VIBRATOR, INTERRUPTER and VIBRATOR, SELF-RECTIFYING.
|
Manufacturer Information:
| 373 | 81541 | SENSATA TECHNOLOGIES MARYLAND, INC | | ES1036 | 20418 | DRS SUSTAINMENT SYSTEMS, INC. USE CAGE CODE 98255 FOR CATALOGING |
|
Techincal Specification:
| UNIT TYPE | ELECTROMECHANICAL | | INPUT VOLTAGE RATING | 6.3 AC VOLTS NOMINAL | | DRIVE VOLTAGE RELATIONSHIP TO INPUT VOLTAGE | EQUAL | | OUTPUT/INPUT VOLTAGE RELATIONSHIP | EQUAL | | REED TYPE | ANY ACCEPTABLE | | CONTACT ARRANGEMENT | SINGLE POLE, DOUBLE THROW, OPEN NEUTRAL | | CONTACT OPERATION SEQUENCE | MAKES BEFORE BREAKS | | CONTACT VOLTAGE RATING | 100.0 DC VOLTS NOMINAL | | CONTACT CURRENT RATING | 2.0 MILLIAMPERES MAXIMUM | | PHASE ANGLE IN DEG | 58.0 | | DWELL TIME RATING IN DEG | 145.0 MINIMUM AND | | 175.0 MAXIMUM | | HERMETICALLY SEALED FEATURE | PROVIDED | | CASE MATERIAL | BRASS | | OPERATING TEMP RANGE | -65.0 TO 165.0 DEG CELSIUS | | TERMINAL QUANTITY | 7 | | TERMINAL TYPE | SOLDER LUG/STUD | | OVERALL LENGTH | 1.312 INCHES NOMINAL | | OVERALL WIDTH | 0.887 INCHES NOMINAL | | OVERALL HEIGHT | 1.656 INCHES NOMINAL | | PLUG IN MOUNTING FEATURE | NOT PROVIDED | | TERMINAL PATTERN ARRANGEMENT | 0.375 IN. DIA TERMINAL LUG CIRCLE | | MOUNTING METHOD | HOLE | | MOUNTING PROVISION | HOLES | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING FACILITY SIZE | 0.125 IN. DIA | | MOUNTING CONFIGURATION | TWO 0.125 IN. DIA MTG HOLES SPACED 1.062 IN. C TO C | | BASE CONNECTION WIRING STYLE | 7 PIN STANDARD TUBE | | COIL TYPE | NOT ISOLATED |
|
|