|
|
|
National Stock Number:
5940-01-525-0666
Federal Supply Class:
5940
National Item Identification Number:
015250666
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 52-257-006 | 0LSP2 | SPECTRUM CONTROL, INC. | | 52-257-006-A | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | PL 9002A1002-1 ITEM 54 | 23905 | L-3 COMMUNICATIONS WESTWOOD CORPORATION DBA EDI DIVISION DIV TANO DIVISION | | PL 9002A1002-1 ITEM 54 | 8Z495 | L-3 COMMUNICATIONS WESTWOOD CORPORATION DBA EDI DIVISION USE CAGE CODE 23905 FOR CATALOGING DIV TANO DIVISION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.213 INCHES | | BASE THICKNESS | 0.032 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 0.810 INCHES | | BOARD OVERALL HEIGHT | 1.560 INCHES | | BOARD OVERALL LENGTH | 3.460 INCHES | | BOARD OVERALL WIDTH | 0.650 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.062 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.438 INCHES | | CURRENT RATING IN AMPS | 20.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.186 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BARRIER STRIP FILTERED TERMINAL BLOCK | | MATERIAL | PLASTIC BOARD | | MOUNTING HOLE DIAMETER | 0.190 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | SPECIAL FEATURES | 6 TERMINALS; PROVIDES EMI/RFI FILTERING; VOLTAGE: 250 VAC; OPERATING TEMP: MINUS 55 DEG C TO PLUS 105 DEG C; SCREW TYPE: 6-32 PHILSLOT HD, ZINC PLATED; 12-22 AWG | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
|
|