|
|
|
National Stock Number:
5940-01-524-4281
Federal Supply Class:
5940
National Item Identification Number:
015244281
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 70700-20694-102 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES | | BOARD OVERALL WIDTH | 3.500 INCHES | | BOARD THICKNESS | 0.090 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 9.500 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.750 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.375 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | COMPONENT BOARD, STABILATOR/SAS TEST UNIT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177. TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | GLASS FIBER AND PLASTIC EPOXY BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.156 INCHES | | SPECIAL FEATURES | 1 COLUMN OF TERMINALS ALONG LEFT EDGE (SEE MARKING FOR SPACING), 6 ROWS OF 3 TERMINALS CENTERED, 0.38, 0.76, AND 4.18 INCHES ABOVE BOTTOM MOUNTING HOLES, AND 0.38, 0.76 AND 4.18 INCHES ABOVE MIDDLE MOUNTING HOLES | | SPECIAL MARKINGS | WITH SHORT END UP, ON FRONT: "CR DESIGNATOR" ACROSS TOP EDGE, LETTERS "A B C D" EQUALLY SPACED ABOVE FIRST ROW OF TERMINALS, "A3" CENTERED ALONG BOTTOM EDGE, AND NUMERALS FROM 22 TO 12 IN DESCENDING ORDER FROM BOTTOM EDGE UP, ALONG LEFT EDGE, BEGINNING 0.38 INCH ABOVE BOTTOM MOUNTING HOLE AND SPACED 0.38 INCH APART, AND NUMERALS FROM 11 TO1 IN DESCENDING ORDER FROM 0.38 INCH ABOVE LEFT, CENTER MOUNTING HOLE TO TOP EDGE, SPACED 0.38 INCH APART; ON BACK: "TERMINAL DESIG" ACROSS TOP EDGE AND LETTERS "E F G H" EQUALLY SPACED ACROSS FIRST ROW OF TERMINALS | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 6 |
|
|