|
|
|
National Stock Number:
5940-01-524-4266
Federal Supply Class:
5940
National Item Identification Number:
015244266
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 70700-20694-101 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.037 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 5.000 INCHES | | BOARD OVERALL WIDTH | 3.500 INCHES | | BOARD THICKNESS | 0.090 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 3.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.313 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | COMPONENT BOARD, STABILATOR/SAS TEST UNIT | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177. TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC EPOXY AND GLASS FIBER BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.156 INCHES | | SPECIAL FEATURES | 6 ROWS OF TERMINALS, CENTERED: 0.380, 1.380, 1.750, 2.750. 2.750, 3.120 AND 4.120 INCHES ABOVE BOTTOM MOUNTING HOLES | | SPECIAL MARKINGS | WITH SHORT END UP, ON FRONT: "R DESIGNATION" CENTERED ON TOP EDGE AND NUMERALS FROM 1 TO 9 IN ASCENDING ORDER FROM LEFT TO RIGHT ABOVE TOP ROW OF TERMINALS AND "A4" CENTERED ON BOTTOM EDGE; ON BACK: "TERMINAL DESIG" CENTERED ON TOP EDGE AND NUMERALS FROM 9 TO 1 IN DESCENDING ORDER FROM LEFT TO RIGHT ABOVE THE TOP ROW OF TERMINALS | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 6 |
|
|