|
|
|
National Stock Number:
5940-01-523-9392
Federal Supply Class:
5940
National Item Identification Number:
015239392
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 812-2204-08 | 26405 | REGAL BELOIT AMERICA, INC | | 812-GP-2204-08 | 26405 | REGAL BELOIT AMERICA, INC |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.210 INCHES | | BASE THICKNESS | 0.410 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 0.720 INCHES | | BOARD OVERALL HEIGHT | 1.160 INCHES | | BOARD OVERALL LENGTH | 5.470 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.060 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.570 INCHES | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 600.0 | | FEEDTHRU CONNECTION END TYPE | 513 BOTH ENDS SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 8 SINGLE COMBINATION | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC PHENOLIC BOARD | | MOUNTING HOLE DIAMETER | 0.210 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SINGLE ROW TERMINAL BLOCK | | SINGLE FEEDTHRU RECEPTACLE QUANTITY | 8 | | SPECIAL FEATURES | FURNISHED WITH 0.164-32 BINDER HEAD, PHIL-SLOT SCREWS; ACCEPTABLE WIRE SIZE IS NO. 12 AWG TO NO. 14 AWG | | SURFACE TREATMENT | COPPER ALLOY TERMINALS | | TERMINAL FACILITY QUANTITY | 8 | | TERMINAL DESIGN | FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
|
|