|
|
|
National Stock Number:
5940-00-789-1809
Federal Supply Class:
5940
National Item Identification Number:
007891809
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 1653793-1 | 56232 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES | | BASE THICKNESS | 0.375 INCHES | | BOARD OVERALL LENGTH | 6.500 INCHES | | BOARD OVERALL WIDTH | 1.438 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.625 INCHES | | BOARD OVERALL HEIGHT | 0.812 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 6.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.443 INCHES | | CRITICALITY CODE JUSTIFICATION | ZZZY | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1.5 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.688 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.719 INCHES | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC AND GLASS BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOT | | MOUNTING SLOT WIDTH | 0.201 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 24 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 599 SINGLE | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | QUALITY CONTROLLED FOR POLARIS | | SPECIAL FEATURES | NO 8-32 NC-2 THREAD STUDS | | SPECIAL MARKINGS | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 | | TEST DATA DOCUMENT | 56232-1-1653793 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|