|
|
|
National Stock Number:
5940-00-143-5544
Federal Supply Class:
5940
National Item Identification Number:
001435544
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 64A92C815-3 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 812-2202-5 | 83330 | DIALIGHT CORPORATION | | 812-GP-2202-05 | 26405 | REGAL BELOIT AMERICA, INC |
|
Techincal Specification:
| DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.375 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.203 INCHES | | BASE THICKNESS | 0.406 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 0.719 INCHES | | BOARD OVERALL HEIGHT | 0.906 INCHES | | BOARD OVERALL LENGTH | 3.781 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.375 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.563 INCHES | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 1600.0 | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC PHENOLIC BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.209 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 5 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 597 SINGLE | | SPECIAL FEATURES | INCL HEX NUTS FOR TERMINALS | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|