|
|
|
National Stock Number:
5935-01-515-9488
Federal Supply Class:
5935
National Item Identification Number:
015159488
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M28840/29CB1DAS5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-28840 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28840/29 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE TO CONNECTOR END | 7.938 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 3.556 INCHES MAXIMUM | | BODY ANGLE IN DEG | 135.0 | | BODY STYLE | ANGLE SHAPE W/CABLE CLAMP | | CABLE ENTRANCE DIAMETER | 0.375 INCHES MINIMUM AND 0.625 INCHES MAXIMUM | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | B01 SINGLE MATING END | | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND WEATHER RESISTANT | | INCLUDED CONTACT QUANTITY | 12 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT POSITION IN DEG | 0.0 AND 119.0 AND 146.0 AND 176.0 AND 298.0 | | OVERALL DIAMETER | 1.141 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 0.375 INCHES AND 0.625 INCHES | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | POLARIZATION METHOD | KEY OR MULTIPLE KEY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | PRECIOUS MATERIAL | GOLD | | SPECIAL FEATURES | CONTACTS PER MIL-C-39029/84-452 | | THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY | | SPECIFICATION/STANDARD DATA | 81349--28840/29 GOVERNMENT SPECIFICATION | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MIL-DTL-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A AND 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 20 AND 10 | | THREAD SERIES DESIGNATOR | UNEF AND DOUBLE STUB |
|
|