| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 18.7 MILLIMETERS MINIMUM AND 20.1 MILLIMETERS MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 34.93 MILLIMETERS NOMINAL |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT POSITION ARRANGEMENT STYLE | 23-55 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 34.93 MILLIMETERS NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 103.0 AND 160.0 AND 220.0 AND 294.0 |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 200.0 CELSIUS MAXIMUM |
| OVERALL HEIGHT | 42.6 MILLIMETERS MINIMUM AND 43.2 MILLIMETERS MAXIMUM |
| OVERALL LENGTH | 31.5 MILLIMETERS MAXIMUM |
| OVERALL WIDTH | 42.6 MILLIMETERS MINIMUM AND 43.2 MILLIMETERS MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 34.0 MILLIMETERS AND 1.500 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-26074,CL 3 OR 4,GRADE B MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | NICKEL |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | MOUNTING SLOT WIDTH 3.71 MILLIMETERS MINIMUM AND 4.11 MILLIMETERS MAXIMUM |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999/20 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | ISO M AND SPECIAL ACME |
| THREAD PITCH IN MILLIMETERS | 1.00 |
| THREAD QUANTITY PER INCH | 10 |
| THREAD TOLERANCE CLASS | 6G EXTERNAL |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |